Injectidry HP-PLUS Floor Drying Package

The HP-PLUS Floor Drying Package is the most improved version of Injectidry HP60i Floor Drying package. This unit is so much quieter (less than 60 dB), more power and easier to set up than its earlier version. You can use up to 12 Multi-Port or 20 8-Port Vac-It panels with an increase up to 30% in drying capacities There are no longer any breaker tripping issues (unless the breaker is the issue or you have too much equipment on the same circuit). The unit's amperage will not exceed max of 12 amps. The HP-PLUS also gives you constant pressure without the need for a pressure relief valve. It will automatically adjust to its maximum airflow capacity, whether you're using 1 or 20 Vac-It panels.

Includes:

• 1 - HP-PLUS Unit (OE-HPPBO-EA)
• 1 - Main Air with factory installed quick connects
• 1 - Main Air Out with factory installed quick connects
• 1 - 6' Air Out Hose
• 1 - 6' Air In Main Hose with inline filter and Main QCT
• 1 - Carry Bag (OE-ICB-EA)
• 1 - Rolling Duffle Bag (OE-DB-EA)
• 2 - 1.5" x 50' Safety Yellow Blank Hose (MP-IDPL03-EA)
• 7 - Quick Connect Panel T's with hose cuffs attached (OE-VACT-EA)
• 14 - Quick Connect 1.5" Hose cuffs (MP-HC3-EA)
• 6 - Quick Connect Inline Manifolds (MP-QCM01-EA)
• 8 - End cap Plugs (OE-IDQCEP01-CS)
• 1 - 3/8" x 200' Safety Yellow Tubing (OE-RH05A-EA)
• 40 - Soft Tubing Stoppers (OE-RP2-EA)
• 1 - Silencer (OE-IDS60SIL-EA)
• 1 - Water separator
• 1 - Manual
• 1 - Vac-It Panel Variety Package (OE-IVIVP-EA), Package Includes:
• 6 - Large Multi Port Panels
• 1 - Large 8-Point Panels
• 1 - Large Clear Panel
• 1 - U-Panel Kit (includes)
• 1 - U-Panel
• 3 - Small Panels with single 3/8" port