Fibre-Tec is a fluorocarbon, water based, stain and soil repellent that protects carpets against oil and water based stains and repels dry soil thus improving the carpets appearance after vacuuming.
The best overall protection you can give a carpet for stain resistance and anti resoiling. The performance is guaranteed and nothing else will do the same job.
Fibre-Tec protects the carpet from oil based stains and resoiling from dry dirt better than a silicone product, but care must be taken to apply it according to directions.
Caution: When diluting, water must be added to the concentrate.
Dilute as follows; For damp carpet, dilute one gallon of Fibre-Tec 1:9 with 9 gallons of water to make 10 gallons of ready to use. Apply at 200 sq. ft. per gallon. On dry carpet one gallon of ready to use mixture with one gallon of water to make 2 gallons of new mixture for dry carpets. Apply this mixture at 100 sq. ft. per gallon. Immediately after applying, brush product into carpet. For retreatment use half the normal concentration.
Keep way from flame and materials heated above 480F. Wear impervious gloves & chemical splash goggles. Inhalation of aerosol or fine spray mist may cause serious respiratory problems.
- Appearance: White Milky Liquid
- Odor: None
- pH: 7- 8
- Specific Gravity: 8.7 lb./gal
- Flash Point: None
- Dilution: 9:1 4/gal
- Storage: Do not freeze or heat over 480